How do I set up the IQrouter in a DMZ?

Most modem/router DMZ configuration either lets you pick the DMZ target from a list using the MAC Address or asks you to enter the DMZ target IP address. In either case you can find the assigned WAN IP address for the IQrouter and MAC address on the Overview page under the Network IPv4 WAN Status section in the IQrouter Administrative Interface.
If your modem/router uses an IP address for DMZ target, we recommend you check with your ISP, or consult your modem/router manual if not using your ISP's equipment, to reserve an IP address for the IQrouter so it does not change each time you reboot your IQrouter.

Have more questions? Submit a request


Article is closed for comments.